JLH-831 parts list page – Revised 02/09/02

Please refer to the 831 assembly instructions before ordering your parts. The 831 can
be built with or without a trimmer option for the 1-volt-per-octave keyboard CV. If you
choose to build without trimmers, several resistors must be hand matched to VERY
close tolerances. These resistors requiring matching are so noted in the parts list.
These parts list reflect recommended changes to VR11, VR12, R27 and R38.

Notice: This web page will be permanently retired on or about 05/01/2002

Parts list – MS Word document

Parts list – Plain text

Back to 831 project page